Panasonic KX-T336 System Reference Manual page 329

3. Call Forwarding (FWD)
3-2.
(continued)
FWD to a VPS extension
Caller
Transfer
VPS1
(FWD-All/Busy)
Code Call State
Ringback Tone
C 1
(The call is forwarded to the
VPS 2.)
*1
Busy Tone
C 2 *2
(FWD-No Answer)
Code Call State
Ringback Tone
A 1
(The call is ringing at Ext.1)
↓
Call Forwarding No Answer Time
has been elapsed.
↓
Ringback Tone
C 1
(The call is forwarded to the
VPS 2.) * 1
Ringback Tone
A 1
(The call is ringing at Ext.1)
↓
Call Forwarding No Answer Time
has been elapsed.
↓
Ringback Tone *
C 2
This way, the VPS 1, typically an Automated-Attendant, can release the call to
*1
the VPS 2 and take another incoming call.
The Follow on ID of the Ext.1 is sent to the VPS 2.
*2 This way, the VPS 1, typically an Automated-Attendant, knows it must give the
caller an opportunity to leave a message before releasing the call.
3-F-27
(21292)
Forward
Ext.1
FWD mode
The VPS 2 is idle.
The VPS 2 is busy.
The VPS 2 is idle.
The VPS 2 is busy.
2
VPS 2
Conditions
Conditions