Panasonic KX-T336 System Reference Manual page 187

5.00 Operator
Description
The system allows the operator to answer,
monitor and control the incoming calls.
Up to two operators (operator 1 and 2) can be
assigned in the system.
The Operator 1 and 2 can perform several
special functions listed in the table below.
If tenant service is employed, up to two operators
can be assigned to each tenant individually.
Not only the ATT (attendant console) operator but
the extension user can be assigned as an
operator.
"Operator 1" must always be selected when only
one operator is assigned.
If an attendant console is connected to the
system, the operator assignment should be
arranged as follows.
Special functions available with each operator.
1 Change Night/Day Mode
2 Change Night/Day Switching Mode (Auto/Man)
3 Set Destination in the Night Mode
(Only for Flexible Night Answer Trunk)
4 Pickup Group Station Lock/Unlock
5 Electronic Station Lock Out/Unlock (to Other Stations)
6 DND Set/Cancel (to Other Stations)
7 FWD Cancel (to Other Stations)
8 One-time FWD Cancel (to Other Stations)
9 External BGM On/Off
10 Manual Trunk Busy-Out Setting
11 CO Access Control
12 OGM Record/Playback
13 Transfer to Internal Modem
(For Remote Maintenance)
14 Local Alarm Indication
15 Remote Timed Reminder
Available with any extension user from software version 9.XX and above.
* 1
In case of an extension, only a PITS with display is available.
* 2
Feature
* 1
3-B-8
(50195)
(When one attendant console is connected)
Operator 1 ATT
Operator 2 extension
(When two attendant consoles are connected)
Operator 1 ATT
Operator 2 ATT
The operator assignment can be done in the
system programming "System-Operation (3/3),"
Operator 1 and Operator 2.
Operator 1 Operator 1
(ATT) (Extension)
ATT
or
Operator 2
(ATT or
Extension)
* 2 * 2
: available
: not available