Configuring Ethernet Communication Using Dynamic Host Configuration Protocol (Dhcp); Figure 6-4: Comm - Lan / Internet Manual Configuration - Teledyne GFC7001T Operation Manual

Communications Setup and OperationTeledyne API – Model T300/T300M CO Analyzer
DHCP: ON is
default setting.
Skip this step
if it has been
set to OFF.
Pressing EXIT from
any of the above
display menus
causes the Ethernet
option to reinitialize
its internal interface
firmware
6.5.2. CONFIGURING ETHERNET COMMUNICATION USING DYNAMIC
HOST CONFIGURATION PROTOCOL (DHCP)
SETUP X.X COMMUNICATIONS MENU
ID INET COM1 COM2
SAMPLE ENTER SETUP PASS : 818
8 1 8 ENTR
SETUP X.X DHCP: ON
SET> EDIT
SETUP X.X DHCP: OFF
SET> EDIT
SETUP X.X INST IP: 000.000.000.000
<SET SET> EDIT
SETUP X.X GATEWAY IP: 000.000.000.000
<SET SET> EDIT
SETUP X.X SUBNET MASK:255.255.255.0
<SET SET> EDIT
SETUP X.X TCP PORT 3000
<SET EDIT
SETUP X.X INITIALIZING INET
...
INITIALIZING INET 100%
SETUP X.X INITIALIZATI0N SUCCEEDED
SETUP X.X
ID INET
Figure 6-4: COMM – LAN / Internet Manual Configuration
The default Ethernet setting is DHCP.
1. See your network administrator to affirm that your network server is running DHCP.
Teledyne Analytical Instruments
Internet Configuration Button Functions
BUTTON
EXIT
Location of cursor. Press to cycle through the range of
[0]
numerals and available characters ("0 – 9" & " . ")
<CH CH> Moves the cursor one character left or right.
DEL Deletes a character at the cursor location.
Accepts the new setting and returns to the previous
EXIT
ENTR
menu.
Ignores the new setting and returns to the previous
EXIT
menu.
Some buttons appear only when relevant.
EXIT
EXIT
EXIT
SETUP X.X INST IP: [0] 00.000.000
<CH CH> DEL [0]
EXIT
SETUP X.X GATEWAY IP: [0] 00.000.000
<CH CH> DEL [?]
EXIT
SETUP X.X SUBNET MASK:[2]55.255.255.0
<CH CH> DEL [?]
EXIT
The PORT number must remain at 3000.
Do not change this setting unless instructed to by
Teledyne Instruments Customer Service personnel.
0%
SETUP X.X INITIALIZATION FAILED
COMMUNICATIONS MENU
COM1 COM2 EXIT
FUNCTION
Cursor
location is
indicated by
brackets
ENTR EXIT
ENTR EXIT
ENTR EXIT
Contact your IT
Network Administrator
144