Adjusting The Limit Stops - Invacare Spree XT Owner's Operator And Maintenance Manual

SECTION 10—TILT

Adjusting the Limit Stops

Contact a HEALTHCARE PROFESSIONAL or ASSISTANT for allowable tilt angles
that are suitable for the occupant.
TRANSPORT READY OPTION ONLY - Wheelchairs with adjustable seat angles
MUST be set between 0° and 15°.
NOTE: For this procedure, refer to FIGURE 10.3.
1. Engage both wheel locks.
2. Tilt wheelchair to desired position.
3. Loosen the set screws that secure the
limit stop in place.
4. Position limit stop flush against top of
cylinder(s).
5. Retighten the set screws. Securely
tighten.
6. If applicable, repeat for other tilt
mechanism.
Spree XT
WARNING
FIGURE 10.3 Adjusting the Limit Stops
68
Limit Stop
Screw
Part No 1118364
Set