Installing/Removing Lift-Off Footrest; Installing; Removing - Invacare Spree XT Owner's Operator And Maintenance Manual

SECTION 4—FRONT RIGGINGS

Installing/Removing Lift-Off Footrest

NOTE: For this procedure, refer to FIGURE 4.2.

Installing

1. Insert the footrest assembly mounting pins into the mounting tube of the wheelchair
frame.
2. Repeat STEP 1 for the other footrest assembly.
3. If necessary, adjust the footrest height. Refer to Adjusting Footrest Height on page 35.

Removing

1. Push the footrest release lever inward and lift footrest upward.
2. Repeat STEP 1 for opposite side, if necessary.
Mounting Pin
Footrest Release Lever
Wheelchair Frame
Mounting Tube
FIGURE 4.2 Installing/Removing Swingaway Footrest
Spree XT
Footrest Assembly
Footplate
NOTE: Only 60° Footrest
shown for clarity. Others will
attach the same way.
34
Part No 1118364