Transferring To And From Other Seats - Invacare Spree XT Owner's Operator And Maintenance Manual

Transferring To and From Other Seats

BEFORE attempting to transfer in or out of the wheelchair, every precaution should
be taken to reduce the gap distance. Align both casters parallel with the object you
are transferring onto. Also be certain the wheel locks are engaged to help prevent
the wheels from moving.
When transferring, position yourself as far back as possible in the seat. This will
prevent damaged upholstery and the possibility of the wheelchair tipping forward.
NOTE: For this procedure, refer to FIGURE 1.6.
NOTE: This activity may be performed independently provided you have adequate mobility and
upper body strength.
1. Position the wheelchair as close as
possible along side the seat to which
you are transferring, with the front
casters parallel to it.
2. Engage wheel locks.
3. Remove or flip back armrests.
4. Shift body weight into seat with
transfer.
NOTE: During independent transfer, little or
no seat platform will be beneath you. Use a
transfer board if at all possible.
Part No 1118364
SECTION 1—SAFETY AND HANDLING
WARNING
CAUTION
Maximum Gap Distance
FIGURE 1.6 Transferring To and From
27
Other Seats
Spree XT