SECTION 2—SAFETY INSPECTION/TROUBLESHOOTING
SECTION 2—SAFETY INSPECTION/
TROUBLESHOOTING
NOTE: Every six months take your wheelchair to a qualified technician for a thorough inspection
and servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth operation
of your wheelchair. To operate properly and safely, your wheelchair must be cared for just like any
other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair.
Safety Inspection Checklists
Initial adjustments should be made to suit your personal body structure needs and
preference. Thereafter follow these maintenance procedures:
Inspect/Adjust Initially
As with any vehicle, the wheels and tires should be checked periodically for cracks
and wear, and should be replaced.
❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect clothing guards for bent or protruding metal.
❑ Ensure that all fasteners on clothing guards are secure.
❑ Ensure arms are secure but easy to release and adjustment levers engage properly.
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure armrest upholstery has no rips.
❑ Ensure armrest pad sits flush against arm tube.
❑ Ensure hand grips are not loose.
❑ Ensure seat, back and/or arm upholstery have no rips.
❑ Ensure trigger release lever cables and handles return when released.
❑ Inspect handrims for signs of rough edges or peeling finish.
❑ Ensure there is no excessive side movement or binding when drive wheels are lifted
and spun.
❑ Ensure sealed bearings and axle nut tension are correct.
❑ Adjust bearing system if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
Spree XT
CAUTION
28
Part No 1118364