Adjusting Limit Stops Of The Tilt Mechanism - Invacare Orbit Owner's Operator And Maintenance Manual

7. When the back reaches desired angle, slowly release the handles of the recliner cable
assemblies.
8. To return the back to the full upright position, reverse the above steps keeping in mind
proper body mechanics.
9. Do one following:
A. Disengage the wheel locks. Refer to Hand Activated Wheel Lock Procedures on
page 66 or Foot Activated Wheel Lock Procedures on page 65.
B. Tilt the wheelchair, if necessary. Refer to Engaging Tilt‐In‐Space on page 70.

Adjusting Limit Stops of the Tilt Mechanism

Adjusting Anterior (Forward) Limit Stops
Anterior (forward) tilt is a feature of this wheelchair designed for the use of a
healthcare professional or assistant only. Repositioning of the anterior (forward)
limit stop must NEVER be performed by the wheelchair user. When anterior
(forward) tilt is needed, it must ALWAYS be repositioned by a healthcare
professional or assistant.
DO NOT operate the wheelchair when the seat frame is in the anterior (forward)
tilt position (seat frame is at approximately 10
may occur to the patient and the assistant(s).
Part No. 1073955
Stroller
Handle
FIGURE 11.2 Operating Recliner
WARNING
73
SECTION 11—RECLINER
Handle
Gas
Cylinder
o
forward tilt). Serious bodily injury
™
Orbit