Table of Contents
Advertisement
Check the status of your wireless connection in the screen below.
7
If the wireless client keeps trying to connect to or acquiring an IP address from the EMG3425-
8
Q10A, make sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the
EMG3425-Q10A.
If your connection is successful, open your Internet browser and enter
URL of any other web site in the address bar. If you are able to access the web site, your wireless
connection is successfully configured.
6.4 Using Multiple SSIDs on the EMG3425-Q10A
You can configure more than one SSID on a EMG3425-Q10A. See
This allows you to configure multiple independent wireless networks on the EMG3425-Q10A as if
there were multiple APs (virtual APs). Each virtual AP has its own SSID, wireless security type and
MAC filtering settings. That is, each SSID on the EMG3425-Q10A represents a different access
point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients
using different SSIDs can access the Internet and the wired network behind the EMG3425-Q10A
(such as a printer).
Chapter 6 Tutorials
EMG3425-Q10A User's Guide
44
http://www.zyxel.com
Section 9.4 on page
79.
or the
Advertisement
Table of Contents
