Table of Contents
Advertisement
Check the status of your wireless connection in the screen below.
7
If the wireless client keeps trying to connect to or acquiring an IP address from the EMG2881-T20A, make
8
sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the EMG2881-T20A is connected to a router
with the DHCP server enabled.
If your connection is successful, open your Internet browser and enter
of any other web site in the address bar. If you are able to access the web site, your wireless connection
is successfully configured.
4.4 Using Multiple SSIDs on the EMG2881-T20A
You can configure more than one SSID on a EMG2881-T20A. See
This allows you to configure multiple independent wireless networks on the EMG2881-T20A as if there
were multiple APs (virtual APs). Each virtual AP has its own SSID, wireless security type and MAC filtering
settings. That is, each SSID on the EMG2881-T20A represents a different access point/wireless network to
wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients using
different SSIDs can access the Internet and the wired network behind the EMG2881-T20A (such as a
printer).
Chapter 4 Tutorials
EMG2881-T20A User's Guide
30
http://www.zyxel.com
Section 7.4 on page
61.
or the URL
Advertisement
Table of Contents
