Installation; Packing List; Basic Installation - EverFocus EMN Series User Manual

4.

Installation

4.1

Packing List

Please check that there is no missing item in the package before installing.
• Camera x 1
• Long Screw x 4 (with 4 Anchors)
- for thick surface installation
• Set Screw x 4 (with 4 Nuts)
- for thin surface installation
• Cable Gland x 1 (with one Waterproof Ring)
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your local
EverFocus office or agents for more information. Please also keep the shipping carton for
possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
4.2

Basic Installation

Please follow the steps below to mount the camera to the wall / ceiling.
1. Paste the supplied mounting template onto a desired location on the wall / ceiling. Drill the three
cross marks and insert the supplied three Anchors into the holes. Note that the camera lens
should point to the arrow direction.
Note: Drill another hole on the upper-left corner of the template only if you want to run the
cables through the wall / ceiling.
EMN Series Mini Mobile IP Dome
• Test-Out Cable (RCA) x 1
• Power Pigtail Cable x 1
• Torx Screwdriver x 1
• Mounting Template x 1
• Software CD x 1
• Quick Installation Guide x 1
4