Add/Edit Pri Trunk - ZyXEL Communications X2002 User Manual

Hide thumbs Also See for X2002:

Table of Contents

Chapter 18 Outbound Line Group

18.3 Add/Edit PRI Trunk

The screens for editing or adding a PRI trunk on the X2002 contain the same

fields. Only the screen used to add a PRI trunk is shown below. Click the Add (or

Edit) icon in the PRI Trunk section of the Outbound Line Group configuration

screen to view the screen as shown.

Figure 145 Add/Edit PRI Trunk

Each field is described in the following table.

Table 89 Add/Edit PRI Trunk

Group/Cancel

Select the ID of the X2002 on which you want to configure the PRI

interface. This is an internal name (not configurable) of the X2002.

This field is not available when editing an PRI configuration.

Type the name of this PRI interface. This field can be 1-20 alphanumeric

characters (A-Z, a-z, 0-9) and underscores (_).

Type the description for this PRI interface. This field can be 0-63

alphanumeric characters (A-Z, a-z, 0-9), underscores (_), hyphens (-)

and spaces. 0 means this field can be left blank.

Click Apply to save your changes.

Click this to go to the Outbound Line Group screen without saving

your changes.

X2002 User's Guide