Table of Contents
Advertisement
Chapter 32 Remote Management
Enter "ssh –1 192.168.1.1". This command forces your computer to connect to
2
the X2002 using SSH version 1. If this is the first time you are connecting to the
X2002 using SSH, a message displays prompting you to save the host information
of the X2002. Type "yes" and press [ENTER].
Then enter the password to log in to the X2002.
Figure 270 SSH Example 2: Log in
The SMT main menu displays next.
3
Secure FTP Using SSH Example
This section shows an example on file transfer using the OpenSSH client program.
The configuration and connection steps are similar for other SSH client programs.
Refer to your SSH client program user's guide.
Enter "sftp –1 192.168.1.1". This command forces your computer to connect to
1
the X2002 for secure file transfer using SSH version 1. If this is the first time you
are connecting to the X2002 using SSH, a message displays prompting you to
save the host information of the X2002. Type "yes" and press [ENTER].
Enter the password to login to the X2002.
2
444
$ ssh –1 192.168.1.1
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be
established.
RSA1 key fingerprint is
21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of
known hosts.
Administrator@192.168.1.1's password:
X2002 User's Guide
Advertisement
Table of Contents
