The Sip Extension Call Forward Screen - ZyXEL Communications X2002 User Manual

Hide thumbs Also See for X2002:
Table of Contents

Advertisement

Table 55 Configure SIP Extension: Basic (continued)
LABEL
Web/IVR/VM
PIN Code
SIP Auth. User
Name
SIP Auth.
Password
Department
First Name
Last Name
Description
Apply
Back to Peer
List

13.3.4 The SIP Extension Call Forward Screen

Use this screen to set up call forwarding and call blocking rules for your extension.
Note: The X2002 checks any Auto-Attendant call forwarding (see
287) and call blocking (see
any of the rules created for individual extensions.
X2002 User's Guide
DESCRIPTION
Type the PIN code that allows the person with this extension to access
the web portal, Interactive Voice Response (IVR) system or Voice Mail.
This value can be 3-10 digits.
Type the SIP user name associated with this extension. The IP phone
registering with the X2002 must provide this for authentication. The
user name can be 1-20 alphanumeric characters (A-Z, a-z, 0-9) and
underscores (_).
Type the SIP password associated with this extension. The IP phone
registering with the X2002 must provide this for authentication. The
password can be 4-32 alphanumeric characters long (A-Z, a-z, 0-9).
Spaces are not allowed.
Type the department for this SIP extension. This field can be 0-40
alphanumeric characters (A-Z, a-z, 0-9), underscores (_), hyphens (-)
and spaces. 0 means this field can be left blank.
Type the first name of the person this SIP extension is assigned to. This
field can be 0-40 alphanumeric characters (A-Z, a-z, 0-9), underscores
(_), hyphens (-) and spaces. 0 means this field can be left blank.
Type the last name of the person this SIP extension is assigned to. This
field can be 0-40 alphanumeric characters (A-Z, a-z, 0-9), underscores
(_), hyphens (-) and spaces. 0 means this field can be left blank.
Type a brief description for this SIP extension. This field can be 0-63
alphanumeric characters (A-Z, a-z, 0-9), underscores (_), hyphens (-)
and spaces. 0 means this field can be left blank.
Click Apply to save your changes.
Click Back to Peer List to go back to Authority Group configuration
page without saving your changes.
Section 6.7 on page
Chapter 13 Authority Group
Chapter 19 on page
139) settings before applying
205

Advertisement

Table of Contents
loading

Table of Contents