Parameter Distinction Between Long And Short Operation - Yes - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
Parameter Distinction between long and short operation – Yes
3.2.4.3.2
If the option Yes is selected with the parameter Distinction between long and short operation, the following
parameters appear:
Short operation -> Event 0
Long operation -> Event 1
<−−− NOTE
Note
The remaining parameter descriptions can be found in the chapter
long and short operation –
190 2CDC508134D0202 | FCA/S 1.x.x.1
No, page 184.
Parameter Distinction between