Parameter Window E, F, G: Fan (One-Level) - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.3.15

Parameter window E, F, G: Fan (One-level)

All settings for the one-level fan are made in this parameter window.
Fan type
Options:
This parameter sets which type of fan is to be controlled.
To control a fan with up to three speeds select the Multi-level option.
To control a single-speed fan, select the One-level option.
Fan speed on bus voltage failure
Options:
The reaction of the fan on bus voltage failure is defined here.

Unchanged: The fan speed remains the same.

OFF: The fan is switched off.
Multi-level
One-level
Unchanged
OFF
FCA/S 1.x.x.1 | 2CDC508134D0202 149