Parameter Window Enable Output E - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.3.7 Parameter window Enable output E...H
Outputs E, F, G
Options:
Outputs E, F and G can be programmed as switch actuators and as fans.

Enabled as switch actuators: Outputs E, F and G appear as individual parameters and can be enabled
individually.
Output E
Output F
Output G
Options:

Block: Output E, F, G is blocked/hidden. No communication objects are visible.

Enabled: The parameter window E, F, G: Output appears. Dependent communication objects become
visible.
All parameters and their setting options for the outputs E, F, G do not differ from those of output H, see
Parameter window H:

Enable as fan: The parameter window E, F, G Fan appears.
Output H
Options:

Block: Output H is blocked/hidden. No communication objects are visible.

Enabled: The parameter window H: Output appears. Dependent communication objects become
visible.
Enabled as switch actuators
Enabled as fan
Block
Enabled
Output, p. 163.
Block
Enabled
FCA/S 1.x.x.1 | 2CDC508134D0202 123