Parameter Window Automatic Control (Multi-Level) - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.3.11

Parameter window Automatic control (Multi-level)

This parameter window is visible if the option Yes has been selected with the parameter Enable automatic
operation in
The limits can be enabled in this parameter window.
Object value "Automatic On/Off"
switch on to the automatic
Options:
This parameter defines how the device should react to a telegram.

1: Automatic is activated by a telegram with value 1.

0: Automatic is activated by a telegram with value 0.
Parameter window E, F, G: Fan
1
0
(Multi-level), p. 124.
FCA/S 1.x.x.1 | 2CDC508134D0202 137