Table of Contents
Advertisement
VRT-401 User Manual
VPN Configuration
This section covers the configuration required on VRT-401 when using Manual Key
Exchange (Manual Policies) or IKE (Automatic Policies).
Details of using Certificates are covered in a later section.
VPN Policies Screen
To view this screen, select VPN Policies from the VPN menu. This screen lists all
existing VPN policies. If no policies exist, the list will be empty.
Note that the order of policies is important if you have more than one policy for particu-
lar traffic. In that case, the first matching policy (for the traffic under consideration) will
be used.
Data - VPN Policies Screen
VPN List
Policy Name
Enable
Remote VPN
Endpoint
Key Type
Figure 46: VPN Policies
The name of the policy. When creating a policy, you should select
a suitable name.
This indicates whether or not the policy is currently enabled. Use
the "Enable/Disable" button to toggle the state of the selected
policy.
The IP address of the remote VPN endpoint (Gateway or client).
This will indicate "Manual" (manual key exchange) or "IKE" (Inter-
net Key Exchange)
74
Advertisement
Table of Contents
