Fiber/Oam Setting; Fiber Configuration - Planet FRT-405N User Manual

5.7 Fiber/OAM Setting

You can configure fiber setting in this part. It includes Flow Control, Ingress Rate Limit, Egress Rate Limit.

5.7.1 Fiber Configuration

Choose Fiber/OAM Setting > Fiber Configuration, and the following page appears. This function allows
displaying the Fiber port status, Mode, Flow Control and Rate limit. The Link Status in the screen displays the
current connection speed and duplex mode.
Fiber Configuration
Object
Link
Mode
Flow Control
Ingress Rate Limit
Egress Rate Limit
Display the Link situation.
Display the network speed.
Enable or Disable Flow Control function.
 Enable: 802.3x flow control is enabled on Full-Duplex mode or
Half-Duplex mode
 Disable: No flow control function.
The value of inbound traffic limitation.
Set the Ingress Rate Limit to No Limit, 512K, 1M, 2M, 4M, 8M, 10M,
50M
The value of outbound traffic limitation.
Set the Egress Rate Limit to No Limit, 512K, 1M, 2M, 4M, 8M, 10M,
50M
69
User Manual of FRT-405N
Description