Table of Contents
Advertisement
Defining your own Virtual Servers
If the type of Server you wish to use is not listed on the Virtual Servers screen, you can
use the Firewall Rules to allow particular incoming traffic and forward it to a specified
PC (Server).
Connecting to the Virtual Servers
Once configured, anyone on the Internet can connect to your Virtual Servers. They
must use the Internet IP Address (the IP Address allocated to you by your ISP).
e.g.
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your ISP, rather than
Dynamic. However, you can use the Dynamic DNS feature, described in the following
section, to allow users to connect to your Virtual Servers using a URL, rather than an
IP Address.
Options
This screen allows advanced users to enter or change a number of settings. For
normal operation, there is no need to use this screen or change any settings.
Data - Options Screen
Backup DNS
IP Address
Figure 32: Options Screen
Enter the IP Address of the DNS (Domain Name Servers) here.
These DNS will be used only if the primary DNS is unavailable.
Internet Features
49
Advertisement
Table of Contents
