Planet VRT-401 User Manual page 58

VRT-401 User Manual
Data - Access Control Screen
Group
Group
"Members" Button
Internet Access
Restrictions
Block by Schedule
Services
Buttons
Members
Save
Cancel
Select the desired Group. The screen will update to display
the settings for the selected Group. Groups are named "De-
fault", "Group 1", "Group 2", "Group 3" and "Group 4", and
cannot be re-named.
Click this button to add or remove members from the current
Group.
If the current group is "Default", then members can not be
added or deleted. This group contains PCs not allocated
to any other group.
To remove PCs from the Default Group, assign them to
another Group.
To assign PCs to the Default Group, delete them from the
Group they are currently in.
See the following section for details of the Group Members
screen.
Select the desired options for the current group:
None - Nothing is blocked. Use this to create the least
restrictive group.
Block all Internet access - All traffic via the WAN port is
blocked. Use this to create the most restrictive group.
Block selected Services - You can select which Services
are to block. Use this to gain fine control over the Internet
access for a group.
If Internet access is being blocked, you can choose to apply
the blocking only during scheduled times. (If access is not
blocked, no Scheduling is possible, and this setting has no
effect.)
This lists all defined Services. Select the Services you wish to
block. To select multiple services, hold the CTRL key while
selecting. (On the Macintosh, hold the SHIFT key rather than
CTRL.)
Click this button to add or remove members from the current
Group.
If the current group is "Default", then members can not be
added or deleted. This group contains PCs not allocated to
any other group.
See the following section for details of the Group Members
screen.
Save the data on screen.
Reverse any changes made since the last "Save".
54