Table of Contents
Advertisement
VRT-401 User Manual
Data - Status Screen
Internet
Connection Method
Broadband Modem
Internet Connection
Internet IP Address
"Connection De-
tails"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
"System Data"
Button
Buttons
Connection Details
System Data
Restart Router
Refresh Screen
This indicates the current connection method, as set in the
Setup Wizard.
This shows the connection status of the modem.
Current connection status:
Active
Idle
Unknown
Failed
If there is an error, you can click the "Connection Details"
button to find out more information.
This IP Address is allocated by the ISP (Internet Service
Provider).
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the
type of connection, a "log" may also be available.
The IP Address of VRT-401.
The Network Mask (Subnet Mask) for the IP Address
above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and
the IP addresses allocated to them, use the PC Database
option on the Advanced menu.
This displays the current name of VRT-401.
The current version of the firmware installed in VRT-401.
Clicking this button will open a Window which lists all sys-
tem details and settings.
View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method
used. See the following sections for details of each sub-
screen.
Display all system information in a sub-window.
Restart (reboot) the Router. You will have to wait for the
restart to be completed before continuing.
Update the data displayed on screen.
30
Advertisement
Table of Contents
