Table of Contents
Advertisement
VRT-401 User Manual
For Manual Key Exchange, configuration is now complete.
Click "Next" to view the final screen.
On the final screen, click "Finish" to save your settings, then "Close" to exit the
Wizard.
IKE Phase 1
If you selected IKE, the following screen is displayed after the Traffic Selector screen.
IKE Phase 1 (IKE SA)
Direction
Local Identity
Remote Identity
Figure 51: VPN Wizard - IKE Phase 1
Select the desired option:
Initiator - Only outgoing connections will be created.
Incoming connection attempts will be rejected.
Responder - Only incoming connections will be accepted.
Outgoing traffic which would otherwise result in a connec-
tion will be ignored.
Both Directions - Both incoming and outgoing connec-
tions are allowed.
This setting must match the "Remote Identity" on the remote
VPN. IP address is the more common method.
This setting must match the "Local Identity" on the remote
VPN.
IP address is the more common method.
80
Advertisement
Table of Contents
