Table of Contents
Advertisement
VRT-401 User Manual
8. Enter the Source IP address and the Destination IP address.
Since this is the outing filter, the Source IP address is "My IP address" and the
Destination IP address is the address range used on the remote LAN.
Ensure the Mirrored option is checked.
9. Click "OK" to save your settings and close this dialog.
10. On the resulting screen (above), ensure the "To DUT" filter is selected, then click
the Filter Action tab to see a screen like the following
Figure 58: Filter Properties: Addressing
Figure 59: New Rule Properties: IP Filter List
88
Advertisement
Table of Contents
