Table of Contents
Advertisement
VRT-401 User Manual
Connection Log
Connection Log
Buttons
Connect
Disconnect
Clear Log
Refresh
Connection Log Messages
Message
Connect on Demand
Manual connection
Reset physical connec-
tion
Connecting to remote
server
Remote Server located
Start PPP
PPP up successfully
Idle time-out reached
Disconnecting
Error: Remote Server
not found
Error: PPP Connection
failed
Error: Connection to
Server lost
The Connection Log shows status messages relating to
the existing connection.
The most common messages are listed in the table
below.
The "Clear Log" button will restart the Log, while the
Refresh button will update the messages shown on
screen.
If not connected, establish a connection to your ISP.
If connected to your ISP, hang up the connection.
Delete all data currently in the Log. This will make it easier
to read new messages.
Update the data on screen.
Description
Connection attempt has been triggered by the "Connect
automatically, as required" setting.
Connection attempt started by the "Connect" button.
Preparing line for connection attempt.
Attempting to connect to the ISP's server.
ISP's Server has responded to connection attempt.
Attempting to login to ISP's Server and establish a PPP
connection.
Able to login to ISP's Server and establish a PPP con-
nection.
The connection has been idle for the time period speci-
fied in the "Idle Time-out" field. The connection will now
be terminated.
The current connection is being terminated, due to either
the "Idle Time-out" above, or "Disconnect" button being
clicked.
ISP's Server did not respond. This could be a Server
problem, or a problem with the link to the Server.
Unable to establish a PPP connection with the ISP's
Server. This could be a login problem (name or pass-
word) or a Server problem.
The existing connection has been lost. This could be
caused by a power failure, a link failure, or Server failure.
32
Advertisement
Table of Contents
