Planet VRT-401 User Manual page 14

VRT-401 User Manual
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of VRT-401, as in this
example, which uses VRT-401' s default IP Address:
HTTP://192.168.0.1
If you can't connect
If VRT-401 does not respond, check the following:
VRT-401 is properly installed, LAN connection is OK, and it is powered
ON. You can test the connection by using the "Ping" command:
Open the MS-DOS window or command prompt window.
Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or
your PC's IP address is not compatible with VRT-401' s IP Address.
(See next item.)
If your PC is using a fixed IP Address, its IP Address must be within the
range 192.168.0.2 to 192.168.0.254 to be compatible with VRT-401's
default IP Address of 192.168.0.1. Also, the Network Mask must be set
to 255.255.255.0. See Chapter 4 - PC Configuration for details on
checking your PC's TCP/IP settings.
Ensure that your PC and VRT-401 are on the same network segment.
(If you don't have a router, this must be the case.)
4. You will be prompted for a username and password, as shown below.
Enter admin for the User Name, and leave the Password blank.
Both the name and password can (and should) be changed, using the Admin
Login screen.
Figure 5: Password Dialog
10