Table of Contents
Advertisement
Note that no rules are in use. Two 2 rules are required - incoming and outgo-
ing.
The outgoing rule will be added first.
6. Deselect the "Use Add Wizard" checkbox, then click "Add" to view the screen
below.
7. Type "To DUT" for the name, then click "Add" to see a screen like the following.
Since this is the outing filter, the Source IP address is "My IP address" and the
Destination IP address is the address range used on the remote LAN.
Ensure the Mirrored option is checked.
Figure 56: Windows 2000/XP - Policy Properties
Figure 57: IP Filter List
VPN
87
Advertisement
Table of Contents
