Virtual Servers Screen - Planet VRT-401 User Manual

VRT-401 User Manual
Using the DMZ port for Virtual Servers
You should connect your Virtual Servers to the DMZ port, for the following reasons:
Traffic passing between the DMZ and LAN passes through the firewall. The fire-
wall will protect your LAN if your Server is compromised and used to launch an
attack on your LAN.
For each enabled Virtual Server, a firewall rule to allow incoming traffic from the
Internet (WAN) to the DMZ is automatically created. If the Server is connected to
the LAN (hub) ports, you must add the firewall rule manually.
Note that the DMZ port is a normal port, not an "uplink" port. If connecting to a hub,
connect to the "uplink" port on the hub.

Virtual Servers Screen

The Virtual Servers screen is reached by the Virtual Servers link on the Internet menu.
An example screen is shown below.
This screen lists a number of pre-defined Servers,. providing a quick and convenient
method to set up the common server types.
Data - Virtual Servers Screen
Servers
Servers
Properties
Enable
PC (Server)
Figure 31: Virtual Servers Screen
This lists a number of pre-defined Servers, plus any Servers
you have defined. Details of the selected Server are shown in
the "Properties" area.
Use this to Enable or Disable support for this Server, as
required.
If Enabled, any incoming connections will be forwarded to
the selected PC.
If Disabled, any incoming connection attempts will be
blocked.
Select the PC for this Server. The PC must be running the
appropriate Server software.
48