Planet VRT-401 User Manual page 30

VRT-401 User Manual
5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows setting. Using this is recommended. By default, VRT-401 will act as
a DHCP Server.
Restart your PC to ensure it obtains an IP Address from VRT-401.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making
the following changes.
In the Default gateway field, enter VRT-401' s IP address and click OK. Your LAN
administrator can advise you of the IP Address they assigned to VRT-401.
If the DNS Server fields are empty, select Use the following DNS server addresses,
and enter the DNS address or addresses provided by your ISP, then click OK.
Figure 19: TCP/IP Properties (Windows XP)
26