VRT-401 User Manual
Windows 2000 Server Configuration
Configuration is the same as for Example 2: Windows 2000/XP Client to except for
specifying the Source and Destination addresses for the "Filter Properties". Instead, for
both IP Filters, the Filter Properties- Addressing should be completed as follows.
The Source Address should be set to "A specific IP Subnet", and the IP address
and Subnet mask set to the address range used on VRT-401's LAN.
The Destination Address should be set to "A specific IP Subnet", and the IP ad-
dress and Subnet mask set to the address range used on the Windows 2000 LAN.
Figure 82: Windows 2000 Server - Addressing
100