Planet VRT-401 User Manual page 64

VRT-401 User Manual
Define Firewall Rule
Clicking the "Add" button in the Firewall Rules screen will display a screen like the
example below.
Data - Define Firewall Rule Screen
Name
Type
Source IP
Figure 38: Define Firewall Rule
Enter a suitable name for this rule.
This determines the source and destination ports for traffic
covered by this rule. Select the desired option.
These settings determine which traffic, based on their
source IP address, is covered by this rule.
Select the desired option:
Any - All traffic from the source port is covered by this
rule.
Single address - Enter the required IP address in the
"Start IP address" field". You can ignore the "Subnet
Mask" field.
Range address - If this option is selected, you must
complete both the "Start IP address" and "Finish IP ad-
dress" fields. You can ignore the "Subnet Mask" field.
Subnet address - If this option is selected, enter the
required mask in the "Subnet Mask" field.
60