Forwarding; Virtual Servers - Planet wnrt-617g User Manual

User's Manual of WNRT-617G
To modify or delete an existing entry:
Step 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
Step 2. Modify the information.
Step 3. Click the Save button.
Click the Enable/ Disabled All button to make all entries enabled/disabled
Click the Delete All button to delete all entries
Click the Next button to go to the next page and click the Previous button to return the previous
page.

5.8 Forwarding

There are four submenus under the Forwarding menu (shown in Figure 5-40): Virtual Servers, Port
Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding
function.
Figure 5-40 The Forwarding menu
5.8.1

Virtual Servers

Choose menu "Forwarding→Virtual Servers" and you can view and add virtual servers in the next
screen (shown in Figure 5-41). Virtual servers can be used for setting up public services on your LAN,
such as DNS, Email and FTP. A virtual server is defined as a service port, and all requests from the
Internet to this service port will be redirected to the computer specified by the server IP. Any PC that
was used for a virtual server must have a static or reserved IP Address because its IP Address may
be changed when using the DHCP function.
-73-