Camera Commands; Device Information - Teledyne EV71YC1MCL2010-BA0 User Manual

7 Camera Commands

The Following chapter is about the camera commands. These commands are detailed in tables with both
ASCII and GenCP forms. See below how to read the tables :
GenCP address ASCII
command
0x12100 tper
Register address
ASCII Command.
for the GenCP
"NA" when pure
Command
GenCP command
7.1

Device Information

These values allow to identify the Camera.
GenCP address ASCII
command
0x0000 NA
0x0004 vdnm
0x0044 mdnm
0x00C4 dhwv
0x0104 idnb
0x0144 deid
0x0184 cust
0x01C4 NA
0x1CC NA

Manufacturer Name (ManufacturerName) : Camera identifier set by the User in a 64Bytes String.
 Read function (ASCII): "r vdnm";
Returned by the camera : "Teledyne-e2v", String of 64 bytes (including "/0")
 Can't be written

Model Name (ModelName) : Camera Model Name (GenICam) set by in factory in a 64Bytes String.
 Read function (ASCII): "r mdnm";
Returned by the camera : <Model Name> , String of 64 bytes (including "/0")
 Can't be written
U M UNIIQA+ M
SER ANUAL ONOCHROME
GenICam Size
command
LinePeriod 4
GenICam Register size
(SFNC) name (in Bytes)
Command
GenICam Size
command
GenCPVersion 4
ManufacturerName 64
ModelName 64
DeviceVersion 64
ManufacturerInfo 64
SerialNumber 64
UserDefinedName 64
DeviceCapability 8
MaximunDevice 4
ResponseTime
– R J – 05/2017
EV
R/W Description
RW Line period from 1 (0.1us) to 65535 (6553,5us)
step 1 (0.1us)
Command
RW : Read/Write
details
RO : Read Only
R/W Description
R Complying GenCP specification version
R String containing the self-describing name of
the manufacturer
R String containing the self-describing name of
the device model
R String containing the version of the device
R String containing Part number of the camera
R String containing the serial number of the
camera
RW String containing the user define name of the
device
R Bit field describing the device's capabilities
R Maximum response time in milliseconds
P | 20
A G E