Image Control - Teledyne EV71YC1MCL2010-BA0 User Manual

7.5

Image Control

GenCP address ASCII
command
0x12250 recl
0x12254 play
0x120000 alin

Save Image (SaveImageControl) : control the recording of the image in the camera
This command is available in the CommCam "Image Control" section :
 Read function (ASCII): "r recl";
Returned by the camera :

"0" : No Record in Progress

"1" : Record in Progress
 Write function (ASCII): "w recl" <value> :

"0" : Stop Recording

"1" : Start Recording

Play Image (PlayImageControl) : control the Replay of the image in the camera
This command is available in the CommCam "Image Control" section :
 Read function (ASCII): "r play";
Returned by the camera :

"0" : Camera display the "Live Image"

"1" : Camera display recorded Image
 Write function (ASCII): "w play" <value> :

"0" : Start Playing Live Image

"1" : Start Playing Recorded Image

FPN coefficients modification : Direct access to the Saved Image in Memory.
The Overall size of the Memory zone is 2 x 4096 Bytes :
 Read function (ASCII): "r alin"
This Function is available only with the version 2.1.0 of the Firmware
U M UNIIQA+ M
SER ANUAL ONOCHROME
GenICam
command
SaveImageControl
PlayImageControl
ImageControlAccess 2*4096
– R J – 05/2017
EV
Size R/W
4 RW Record the Current Image
Read :
0 : No Record in Progress
1 : Record in Progress
Write :
0 : Stop Record
1 : Start Record
4 RW Play Image :
0 : Play "Live" Image
1 : Play Recorded Image
RO Manual access to the recorded Image
Description
P | 29
A G E