Synchronisation Modes With Maximum Exposure Time - Teledyne EV71YC1MCL2010-BA0 User Manual

If T
respect this line Period, the Exposure Time as to be set by respecting : T
Then, the real exposure time is : Tint
In the same way, The high level period of the Trig signal in sync=3 mode, T
For a Line Period of LinePer, the maximum exposure time possible without reduction of
line rate
B.2 Synchronisation Modes with Maximum Exposure Time
Line Trigger
CC1 or Internal
Exposure Time
Internal
In these modes, the rising edge of the Trigger (internal or External) starts the readout process (T
previous integration. The Real exposure time (Tint
delayed from (T + T
x d
U M UNIIQA+ M
SER ANUAL
>
is the Line Period (internal or external coming from the Trigger line), in order to
per
is : Tint = T -T
max per
be about Tint = T
real
T
d
T = T
per
T
x
T
pix
Digital Conversion
) from the rising edge of the incoming Line Trigger.
– R J – 05/2017
ONOCHROME EV
= T + T - T .
real int x d
(T is defined above) but the effective Exposure Time will
pix pix
+ T . - T .
int x d
T
h
int
Tint
real
T
x
T
) is finally equal to the Line Period (T
real
+ T
int pix
>= T
ht
pix
Digital Conversion
) even if it's
per
<= T
per
pix
Synchro
Mode
Sync = 2
Sync = 5
In the
Camera /
sensor
) of the
pix
P | 49
A G E