4.4.2 Wall-Mount Installation
1. Optionally insert a micro SD card or replace the desiccant bag(s) inside the camera module (see
4.4.1 Inserting a Micro SD
2. Drill 4 screw-depth holes for mounting the bracket base plate and then drill a through-wall hole
for inserting the camera cables. You can optionally drill a second through-wall hole to separate
cable feeding.
3. Attach the waterproof silicon pad to the bracket base plate for waterproofing.
Waterproof
silicon pad
4. Optionally insert the supplied Anchors inside the holes on the wall.
5. To protect the camera lens from getting dirty and scraped up, please wear the supplied gloves
before screwing the camera to the Enhanced Wall Mount Bracket.
6. For EPN5210, screw the camera to the Adapter first using the supplied Hexagon Socket Screws.
Card).
EPN5210
B
racket base plate
10
EPN5230 / EPN5210