EverFocus EPN5230 User Manual page 20

3. To access to the Live View window, double-click the IP address of the device, the login window
appears.
4. Download and install the ActiveX file by clicking EverFocus on the login window. Click Run and follow
the instructions to install the program. Click Finish to complete the process.
5. Select a desired language by clicking the language button on the top-right corner of the login
window.
6. Type the user name and password on the login window. By default, the user ID is user1 and the
password is 11111111. Click Login, the live view window appears.
Note:
1. To enable Remote Live View, Firmware Upgrade and ActiveX Prompt on Internet Explorer,
some settings have to be complete. Please refer to
in the User's Manual.
2. The default IP mode of the IP camera is DHCP. However, if there is no dynamic IP address
assigned to the device, its IP will switch to 192.168.0.10.
5.2 Settings for Microsoft Internet Explorer
14
EPN5230 / EPN5210