1. Manuals
  2. Brands
  3. EverFocus Manuals
  4. Security Camera
  5. EPTZ3000
  6. User manual

EverFocus EPTZ3000 User Manual

Speed dome
Hide thumbs Also See for EPTZ3000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Speed Dome
EPTZ3000/EPTZ3000I
USER MANUAL
Date: Feb15, 2006

Advertisement

Table of Contents
loading

Related Manuals for EverFocus EPTZ3000

Summary of Contents for EverFocus EPTZ3000

  • Page 1 Speed Dome EPTZ3000/EPTZ3000I USER MANUAL Date: Feb15, 2006...

  • Page 2: Table Of Contents

    Profile of EPTZ3000/EPTZ3000I ............1-7 1.3.2. EPTZ3000/EPTZ3000I Base Board ...........1-8 1.3.3. EPTZ3000/EPTZ3000I Control Board ..........1-9 1.4. EPTZ3000/EPTZ3000I Connection ............1-10 1.5. EPTZ3000/EPTZ3000I Quick Operation Guide (Work with EKB500) .1-11 2. EPTZ3000/EPTZ3000I INSTALLATION ..........2-12 2.1. Packing List ...................2-12 2.2. Cable Needed..................2-12 2.3. Initial Setup ....................2-13 2.3.1.
  • Page 3 EPTZ- CMA: Corner Mount Adapter..........2-26 3. EPTZ3000/EPTZ3000I CAMERA SETUP MENU......3-27 3.1. Structure of the Setup Menu ..............3-27 3.1.1. Camera Setup Menu ................3-28 4. EPTZ3000/3000I FUNCTION SETUP AND OPERATION....4-34 4.1. Manual Control Mode ................4-34 4.2. Auto Pan Mode ..................4-34 4.3.

  • Page 4: Eptz3000/Eptz3000I Overview

    1. EPTZ3000/EPTZ3000I OVERVIEW 1.1. Introduction EPTZ3000/EPTZ3000I, an intelligent high-speed dome camera is ready to secure your property with its omni-directional and exact monitoring. A 30X optical and 8X digital zoom combining with a high-performance chip makes captured images clear and vivid. The other powerful camera functions EPTZ3000/EPTZ3000I equips with: Wide Dynamic makes objects clear in a high illumination background.
  • Page 5 Furthermore, the micro control unit enables camera a nimble and exact movement from minimal 0.01 /sec to maximal 360 /sec. It can go to every preset position in 1 second. It also has other advantages such as: 239 preset positions are available. 16 cruise tours can be set, and each tour contains up to 16 positions.

  • Page 6: Specifications

    1.2. Specifications Model EPTZ3000 (outdoor) EPTZ3000I (indoor) Power Supply AC 24V Power consumption 70W with heater 18W without heater 40 ~+60 0 ~+40 Operating temperature Image device 1/4”, Vertical double density interline CCD Zoom ratio 30x Optical (8x Digital zoom, max 240x) Lens 30x optical zoom, f=3.3 mm (wide) to 99.0 mm (tele), F1.6 to F3.2...
  • Page 7 Communication RS-485 Address editable Yes (through DIP switch) Speed Dome Address 0-255 Manual Pan/tilt speed Pan: 0.01º ~ 360º/s ; Tilt: 0.01º ~ 360º/s Video Output Safety CE, FCC Dimension 220(W) x 310(H)mm Weight 3.2kg...

  • Page 8: Feature

    1.3. Feature 1.3.1. Profile of EPTZ3000/EPTZ3000I EPTZ3000 Wall Mount Bracket M5 Bolt (Hex) x3 Base PCB board Control board Connection Bus Housing Power Cable Inner Housing BNC Cable RS485 Cable M3 Bolt x3 Mechanical Part Bulb Camera Module EPTZ3000I Power Cable...

  • Page 9: Eptz3000/Eptz3000I Base Board

    The details of the alarm connector (JP5) are shown on the APPENDIX A. For EPTZ3000 outdoor model, JP1, JP3 and JP6 that are two-pin connectors need to be taken off during installing. JP1 and JP3 are connectors for heater, and they can be switched.

  • Page 10: Eptz3000/Eptz3000I Control Board

    1.3.3. EPTZ3000/EPTZ3000I Control Board The PCB board with two dipswitches is the control board of EPTZ3000/EPTZ3000I. The two switches are used to set address, protocol, Baud Rate, video format and terminal resistance.

  • Page 11: Eptz3000/Eptz3000I Connection

    1.4. EPTZ3000/EPTZ3000I Connection 110V AC 24V AC POWER 24V AC / 3.5 A Adapter Video Out Ω 1.0Vpp 0.2V, 75 RS485 Tx(+) RS485 Control Line RS485 Tx(-) EPTZ3000/ Alarm 1 EPTZ3000I Alarm 2 Alarm 3 4 ALARM INPUTS Alarm 4...

  • Page 12: Eptz3000/Eptz3000I Quick Operation Guide (Work With Ekb500)

    EPTZ3000/EPTZ3000I and EKB500 (Keyboard) can work together by using factory default setting. You just need to connect cables by the following steps: 1. Connect the RS-485 cable to EPTZ3000/EPTZ3000I and a keyboard (EKB500). 2. Connect a video cable from EPTZ3000/EPTZ3000I to a monitor.

  • Page 13: Eptz3000/Eptz3000I Installation

    M3 screw x3 for bulb fixing 2.2. Cable Needed Power Cable An adapter with 24V AC/3.5A output provides the power to the EPTZ3000/EPTZ3000I. An extension power line may be needed. Note: The input AC voltage range of an adapter depends on different area.

  • Page 14: Initial Setup

    Video Cable A BNC cable is used for connecting an EPTZ3000/EPTZ3000I to a DVR or a monitor. An amplifier may be needed if the video cable is too long. Control Cable Basically, EPTZ3000/EPTZ3000I uses a differential pair to connect to other devices by cascading.

  • Page 15: Address Setting

    2.3.1. Address Setting The address code of the EPTZ3000/EPTZ3000I should be set to correspond properly with a control device to control multiple dome cameras. The address codes are made up by the dipswitch SW1 (8 bits) on the PCB board. The 8 bits dipswitch...
  • Page 16 Switch Address Switch Switch Switch Address Address Address Switch Switch Switch Switch Address Address Address Address Switch Switch Switch Switch Switch Address Address Address Address Address 2-15...
  • Page 17 Switch Address Switch Switch Switch Address Address Address Switch Switch Switch Switch Address Address Address Address Switch Switch Switch Switch Switch Address Address Address Address Address 2-16...

  • Page 18: Communication Protocol Setting

    Notice: Please make sure the power is off before setting, and restart the EPTZ3000/EPTZ3000I to enable a new value after changing. Set all of protocol switches to ON; the speed EPTZ3000/EPTZ3000I will enter a self-test mode. 2.3.3. Transmission Speed Setting (Baud Rate Setting)

  • Page 19: Rs-485 Bus Terminal Resistance

    Notice: Please make sure the power is off before setting, and restart the EPTZ3000/EPTZ3000I to enable a new value after changing. 2.3.4. RS-485 Bus Terminal Resistance For central controlling, the terminal resistance should be set for the device that is the furthest one away from the controller.

  • Page 20: Rack And Speed Dome Installation

    2. Check for all necessary materials, and ensure if the selected installation location is suitable for the EPTZ3000/EPTZ3000I. 2.4.2. EPTZ3000 Dome Camera Wall Mount Installation Notice: Installation location that is a wall, a pole or a ceiling needs to support above five times the total weight of the camera assembly (about 16 kg) to avoid shaken images, and dropping.
  • Page 21 4. Connect the cable connectors to the nodes on the PCB board, and then fix the PCB board in the housing by screwing 4 bolts on it. Notice: Please notice the polarity of control line. The EPTZ3000 will not work if the polarity of control line is mis-connected.
  • Page 22 5. Align the two screw holes on the bottom of mechanical part to the two bolts on the base of the housing, and twist the mechanical part clockwise a little bit in order to engage it with the base. Screw the two bolts on the base, and then connect and fix the connection bus to the PCB board on the mechanical part.

  • Page 23: Eptz3000I Dome Camera Installation

    7. Turn on the power, and start to operate the EPTZ3000. Note: When turning on the power, EPTZ3000 will enter self-inspection mode, and carry out a self-testing program. After finishing self-inspection, you can start to operate the EPTZ3000.
  • Page 24 Cut the ceiling RELAY Notice: Please notice the polarity of control line. The EPTZ3000I will not work if the polarity of control line is mis-connected. 6. Align the two screw holes on the bottom of mechanical part to the two bolts on the base of the housing, and twist the mechanical part clockwise a little bit in order to engage it with the base.
  • Page 25 Notice: The camera module on the mechanical part is very sensitive. Please be careful when installing this part. 7. Remove the lens protection cover before installing the bulb. Screw the connection wire to the housing in order to prevent the bulb from being drop down. Align the 2 buttons on the bulb base with the 2 buttons on the housing, and push bulb base to clip the housing.

  • Page 26: Accessories

    2.5. Accessories 2.5.1. EPTZ-CPMA: Ceiling Pendant Mount Adapter The pole mount is used for installing a speed dome on the ceiling indoors or outdoors. The extension poles are available for the pole mount. 2.5.2. EPTZ-PMA: Pole Mount Adapter The pole adapter is used for installing a wall mount bracket to a pole indoors or outdoors. 2-25...

  • Page 27: Eptz- Cma: Corner Mount Adapter

    2.5.3. EPTZ- CMA: Corner Mount Adapter The corner mount are used for installing a wall mount bracket to a 270 corner of walls indoors or outdoors. 2-26...

  • Page 28: Eptz3000/Eptz3000I Camera Setup Menu

    3. EPTZ3000/EPTZ3000I CAMERA SETUP MENU In this section, setup and operation guide of EPTZ3000/EPTZ3000I will be introduced. There are 18 items of the setting menu. However, there is only one line on the line display, so using some combination keys to operate is necessary.

  • Page 29: Camera Setup Menu

    3.1.1. Camera Setup Menu Press MENU to enter camera setup menu. Press Shift + Joystick up/down to change subentries, and right/left to change the setting. 1. CAM ID The name assigned to the camera. 2. DZOOM Digital zoom enable or disable. ON: Enable a digital zoom.
  • Page 30 6. WBC MODE: White balance control mode. AUTO: Auto white balance compensation. 2000K: Manual white balance compensation in 2000K color temperature. 3200K: Manual white balance compensation in 3200K color temperature. 5100K: Manual white balance compensation in 5100K color temperature. Note: WBC setting will affect the wide dynamic range, or other image performance. To adjust a proper value is important.
  • Page 31 11. ALM-IN4 SET The status of input alarm 4. N.O.: Enable a normal open alarm input. N.C.: Enable a normal close alarm input. OFF: Disable alarm input. 12. ALM-IN PRIO The priority of alarms. 1234: The alarm priority is 1>2>3>4. 2341: The alarm priority is 2>3>4>1.
  • Page 32 1/60 (NTSC) and 1/50 (PAL): default manual shutter; 1/160: 1/160 sec shutter for both NTSC and PAL 1/250: 1/250 sec shutter for both NTSC and PAL 1/1000: 1/1000 sec shutter for both NTSC and PAL 1/2500: 1/2500 sec shutter for both NTSC and PAL 1/10000: 1/10000 sec shutter for both NTSC and PAL 1/120000: 1/120000 sec shutter for both NTSC and PAL x2: two-time default manual shutter...
  • Page 33 can set the masking size and position in the private zone setup mode. In this mode, you can press “Shift” + “6” to increase masking horizontal size; “Shift” + “4” to decrease masking horizontal size; “Shift” + “2” to increase masking vertical size; “Shift”...
  • Page 34 23. LOAD DEFAULT Load default setting. Select this item, and then press “Enter” to load default setting. Press “Clr” + “Menu” whenever you want to quit menu setting. 24. EXIT : To exit. Select this item, and then press “Enter” to quit setting. Press “Clr”...

  • Page 35: Eptz3000/3000I Function Setup And Operation

    4. EPTZ3000/3000I FUNCTION SETUP AND OPERATION 4.1. Manual Control Mode Manual control: Shift Joystick Up/Down/Left/Right, and turn it Clockwise/Counterclockwise to control speed dome. Use the control keys which are Zoom, Focus and IRIS function keys on the keyboard to zoom In/Out, focus N (near)/F (Far), or IRIS +/-.

  • Page 36: Tour Mode

    Preset a position: Shift the Joystick to the position you would like to preset, and then press Shift + Position. The system will ask you to enter the preset position number (1~239), and then press Enter to save the position. There are up to 239 positions can be preset.

  • Page 37: Alarm Link To A Position/Tour

    3. The camera runs 1 2 3 1 2 3 in the One-way tour mode, and 1 2 3 2 1 in the To-and-fro tour mode. 4.5. Alarm Link to a Position/Tour EPTZ3000/EPTZ3000I have 4 alarm inputs that can be set to link to a position or a tour when an alarm is triggered. Set an alarm link: Press F1 to set an alarm link.

  • Page 38: Appendix : The Alarm I/O Connection

    APPENDIX : The Alarm I/O Connection There are 4 alarm inputs and 1 alarm output available. The alarm I/O connector that is marked as JP5 is a nine-pin connector. It is located on the PCB board of the housing. Pin # Function Alarm Input 3 Ground...
  • Page 39 EverFocus Electronics Corp. China Office: Head Office: Room 609, Technology Trade Building, 12F, No.79 Sec. 1 Shin-Tai Wu Road, Shandgdi Information Industry Base, Hsi-Chih, Taipei, Taiwan Haidian District, Beijing,China TEL: +886-2-26982334 TEL: +86-10-62971096 FAX: +886-2-26982380 FAX: +86-10-62971432 www.everfocus.com.tw www.everfocus.com.cn USA Office: Japan Office: 1801 Highland Ave.

This manual is also suitable for:

Eptz3000i

Table of Contents