Io Alarm - EverFocus EPN5230 User Manual

EPN5230 / EPN5210

7.4.2. IO Alarm

You can configure the alarm settings along with the schedule to active the alarm functions on this
page.
【Linkage】
Alarm Output: Select alarm in Normal Open or Normal Close from the drop-down list. For Normal
Open, you can further configure the alarm settings including Alarm Output Time and IO Channel.
Alarm Output Time: Set up the alarm output duration time.
IO Channel: Select a camera's alarm in channels to configure the settings. Check the box to enable the
alarm in channel. After enabling the alarm in channel, you can further configure the IO channel settings
including Preset ID, IO Output, Snap/Record, Activate Level, Email and FTP Upload.
Preset ID: Check the box to enable the Preset function for the alarm in channel, and select a preset
number from the number drop-down.
IO Output: Check the box to enable the IO Output function for the alarm in channel, and select an
alarm out channel from the number drop-down.
Snap/Record: Select an alarm notification type from None, Snapshot, Record and Snapshot+Record.
Activate Level: Select alarm out Normal Open or Normal Close from the drop-down list.
Email: Check the box to enable transmitting the alarm notification to the mail server. To configure
Email settings, see 7.3.3. Port Setting.
FTP Upload: Check the box to enable transmitting the alarm notification to the FTP server. To
configure FTP settings, see 7.3.3. Port Setting.
52