EverFocus EPN5230 User Manual page 31

pattern scan. During the period of scanning, you can use the direction/zoom/iris/focus buttons on the
PTZ Control panel to move the camera to different positions. Click the Stop recording button
stop recording pattern scan. To activate the Pattern function, select a number from the number
drop-down and then click the Invoke button .
Tour: You can combine multiple preconfigured preset positions into one long
sequence. Up to four Tour sequences can be set up. To set up a Tour
sequence, select a tour number from the number drop-down, click the +
button and a Message window pops up. Select the desired preset number,
and then input a dwell time in the Delay Time column for the camera to
pause at a preset position. Click the Add button, this preset number will be
displayed in the Tour table below the Tour field. Repeat this step to add as
many preset numbers as desired. To delete a preset number from the Tour
table, click to select a preset number from the Tour table and then click the
X button. After configuration, click the Save button to save the setting. To
activate the Tour function, select a tour number from the number
drop-down and then click the Invoke button
Tour button on the right side of the PTZ Control Panel to quickly
activate the Tour function.
25
EPN5230 / EPN5210
. You can also use the Quick
to