Network; Ethernet - EverFocus EPN5230 User Manual

7.3

Network

You can configure network-related settings, including DNS, IP, DHCP, DDNS, Port, Email and FTP on this
page. Click the tab of the one you want to see.

7.3.1. Ethernet

The following information is required to configure the network settings. Contact your network
administrator or your internet service provider to get the info.
【DNS Settings】
DNS Address: Enter the IP address of the DNS server if this is provided by an ISP.
【Ethernet Setting】
IP: When DHCP is not used, the user needs to manually enter the IP address of the camera. Do not
enter an IP address that is already used for your computer or other network cameras.
Mask: This field is used to set the subnet mask for your network, so that the IP camera will be
recognized within the network. Example: 255.255.255.0.
Gateway: This field is used to set the gateway for your network so that the IP camera will be
recognized within the network.
MAC: The value of MAC address cannot be changed on this page, and are for reference only.
46
EPN5230 / EPN5210