Port Setting - EverFocus EPN5230 User Manual

EPN5230 / EPN5210

7.3.3. Port Setting

You can configure ports, Email and FTP settings using this page.
【Network Port Setting】
HTTP Port / RTSP Port: Enter the HTTP and RTSP port numbers. Click the Save button on the
bottom-right to save the settings.
【Email Setting】
This area is for configuring the mail server that is used to send e-mail text and image notifications from
the camera to predefined addresses via SMTP. Note that to enable e-mail notification function, you
have to check the Email box on Alarm > IO Alarm (see 7.4.2 IO Alarm) and Alarm > Motion > Parameter
Config pages (see 7.4.3.2 Parameter Config).
Address: Enter the IP address or the host name of the SMTP server used to send e-mails.
Port: Enter the port number for SMTP.
Identity Verify: Check this box if the SMTP server requires authentication (user/password).
User name: Input the user's login ID if the SMTP server requires authentication.
49