Autotest Results For Smart Remote Mode; Fiber Ids For Saved Results In Smart Remote Mode - Fluke Versiv User Manual

Versiv Cabling Certification Product Family
Users Manual
Save the result:
3-6
If Auto Save is on, the tester uses the next two IDs to save

the results for the two fibers.
 If Auto Save is off, tap SAVE if the test passed or FIX
LATER if the test failed. The SAVE RESULT screen shows
the next two IDs available. You can change the IDs if
necessary.

Autotest Results for Smart Remote Mode

Unsaved results show the results for both fibers. See Figure 48.

Fiber IDs for Saved Results in Smart Remote Mode

If Auto Save is On and the test passed, the tester saves two
records, one for each fiber. The records have the next two IDs in
the ID list.
If you must change the ID for a fiber before you save results, set
Auto Save to Off before you do the test. Then, on the SAVE
RESULT screen, tap the Input Fiber ID or Output Fiber ID window.
124