Table of Contents
Advertisement
Versiv Cabling Certification Product Family
Users Manual
Autotest in Smart Remote Mode
Use Smart Remote mode to do tests on dual-fiber cabling.
In this mode, the tester measures loss and length on two fibers at
two wavelengths. If you turn on the Bi-Directional function, the
tester makes measurements in both directions.
Figure 46 shows the equipment for tests in Smart Remote mode.
Fiber Tests with Two Main Testers
If you have two main testers, you can use one as a remote tester
for tests in Smart Remote mode. This also lets you use
FiberInspector video probes at both ends of the cabling for faster
inspections of fiber endfaces.
To use a main tester as a remote
Tap TOOLS then tap Main as Remote.
118
Advertisement
Table of Contents
