Table of Contents
Advertisement
CableIQ Qualification Tester
Users Manual
Autotest Results for Twisted Pair Cabling
The Autotest shows results in three levels of detail, as
described in Figures 9 through 12.
24
A
Overall result for the Autotest.
B
Overall result for each Autotest type:
: The cabling qualifies for the application. If a far-end adapter is
F
not connected, the tester assigns a
cannot be completely verified.
f
: The cabling does not qualify for the application.
i
: Results are for informational purposes only, not for qualification.
The cabling cannot be completely qualified for the application
because the wiremap results are incomplete (wiremap adapter not
used).
A D
Use
C
Press
J M
test. To see details for a test parameter, use
highlight the parameter; then press
D
Press
K S
avv15f.eps
Figure 9. Autotest Summary Screens
i
result because the wiremap
to scroll through the tests.
H
or
to see summary results for the highlighted
J M
to save the results.
A D B C
to
H
or
.
Hide quick links:
Advertisement
Table of Contents
