Versiv Cabling Certification Product Family
Users Manual
Verify Operation
The tester does a self test when you turn it on. If the tester shows
an error or does not turn on, refer to "If the Tester Does Not
Operate as Usual" on page 240.
Clean the Tester
To clean the touchscreen, turn off the tester, then use a soft, lint-
free cloth that is moist with water or water and a mild detergent.
To clean the case, use a soft cloth that is moist with water or
water and a mild detergent.
Do not put the tester or the battery pack in water.
To prevent damage to the touchscreen or the case,
do not use solvents or abrasive materials.
When you clean the touchscreen or the case, do not
let liquid get under the plastic around the
touchscreen.
To clean the optical connectors on the module, see the
instructions in Chapter 4.
Clean the FI-1000 Video Probe
To clean the case, use a soft cloth that is moist with a mild
detergent.
To prevent damage to the case, do not use solvents
or abrasive materials.
To clean the lens, remove the adapter tip, then wipe the lens with
an optical-grade cloth that is moist with an optical-grade cleaning
solution.
232
Warning
Caution
Caution