Versiv Cabling Certification Product Family
Users Manual
OTDR Trace
To see the OTDR trace, tap TRACE on the OTDR results screen.
Figure 68 shows an example of an OTDR trace.
A
B
C
D
The decibel scale shows the level of backscatter. The tester sets
the backscatter level at the start of the trace to approximately
0 dB.
The measurement cursor. To measure loss and distance, tap
the yellow circle so that MARK shows, drag the cursor to the
start of the measurement, tap MARK, then drag the cursor to
the end of the measurement.
172
E
F
Figure 68. OTDR Trace
G
K
J
I
H
GPU14.EPS