Otdr Port Connection Quality - Fluke Versiv User Manual

Figure 59. How to Use the Optional TPAK Magnetic Hanger

OTDR Port Connection Quality

When you do an OTDR test, the test shows the quality of the
OTDR port connection (Figure 60). If a test takes more than
approximately 3 seconds, the PROGRESS screen also shows a
preview of the OTDR trace. The trace is black for one wavelength
and blue for the other wavelength.
If the gauge is not in the Good range
 Clean the OTDR port and the fiber connector. Use a video
probe to inspect the endfaces in the port and fiber connector
for scratches and other damage. If an endface on the tester
shows damage, contact Fluke Networks for service
information.
Chapter 7: Use the OTDR
OTDR Port Connection Quality
GPU191.EPS
159