Install Flush-Mount Box; Open The Front.door Station: The Win:clip; Tm System - TCS AVU940x0 Product Information

Install the flush-mount box
 Guide the connection lines through the cable conduit in the flush-mount box and fix the
box with suitable screws to the wall.
 The front-door station should be flush with the wall.
Open the front-door station: the win:clip
The device is equipped with the win:clip
without any screws.
Open the housing
1. Push the enclosed win:clip
ning in the loudspeaker cover.
Press the key into the opening up to the stop and
keep it in this position.
2. Push the name plate glass slightly upwards until it
jumps out.
3. Remove the glass.
4. Remove the win:clip
Close the housing
1. Push the enclosed win:clip
opening in the loudspeaker cover.
Press the key into the opening up to the stop and
keep it in this position.
2. Push the name plate glass under the loudspeker
cover.
3. Press the name plate glass onto the device and
push it slightly downwards until it snaps-in.
4. Remove the win:clip
Do not seal the device with silicon under any circumstances! Condensed water must
!
be able to run off and evaporate.
TCS TürControlSysteme AG, www.tcsag.de
TCS Hotline • Mail: hotline@tcsag.de
TM
TM
key into the small ope-
TM
key.
TM
key into the small
TM
key.
6
TM
system
system. Opening and closing can be realised
Subject to technical changes
PI_AVU940x0-uk
11/2012